In short: Rocket Pool is a decentralised liquid staking protocol for Ethereum. People who deposit ETH receive rETH, a token that rises in value against ETH as staking rewards build up, while independent node operators run the validators with a bond of as little as 4 ETH each, with the rest supplied from depositors. The key points:
- Anyone with the technical skill can run a node, unlike protocols that use a curated set of operators.
- Since the Saturn 1 upgrade in February 2026, new validators sit in a single megapool contract per operator.
- rETH does not grow in number; its exchange rate against ETH rises instead.
- Risks include smart contract bugs, operator penalties and rETH trading below its underlying value.
Rocket Pool’s Saturn 1 documentation sets out the current bond, commission and RPL rules, and Ethereum’s guide to staking ETH explains the base layer. Moneysmart’s overview of crypto assets covers the risks of holding crypto, and ASIC’s guidance on digital assets explains how crypto services are regulated in Australia.
Liquid staking on Ethereum is dominated by one very large protocol, but it is not the only way to do it. This guide explains how Rocket Pool works, what rETH is, what node operators do, how the design differs from the largest alternative, and the risks and trade-offs.
Why Liquid Staking Exists
To secure Ethereum, validators lock up ETH and earn rewards for doing their job properly. Running a validator solo requires a full 32 ETH, a dependable computer and reliable internet, and the funds are illiquid while staked. Liquid staking protocols pool deposits so that anyone can take part with any amount and receive a token representing their share, which can be used elsewhere in DeFi. The fundamentals are crypto staking, what a validator is and how blockchain consensus works.
What Makes Rocket Pool Different
The key difference is who runs the validators. In many liquid staking designs, a limited set of vetted operators handles the technical work. Rocket Pool is permissionless for node operators: anyone who meets the requirements and has the technical skill can run a node. That lowers the barrier to participation and is intended to spread control across more independent parties, which many people see as healthier for Ethereum’s decentralisation. The trade-off is that a more open design requires stronger built-in incentives and protections to make sure operators behave well, and it tends to be less capital efficient than a large centrally coordinated pool. The wider question of concentration is part of decentralisation.
The Two Kinds of Participants
Stakers: people who deposit ETH and receive rETH. They do not need any technical setup, and they earn a share of staking rewards through the growing value of the token.
Node operators: people who run validators. They put up a bond of ETH for each validator, currently 4 ETH with 28 ETH matched from depositors, and supply the hardware and technical work. In return they earn a commission on the ETH provided by stakers, set at a base of 5% and adjustable by the protocol’s governance, on top of rewards on their own bond. They can also choose to stake the protocol’s RPL token for an extra share of revenue.
How Megapools and Minipools Work
Before the Saturn 1 upgrade, each validator run through Rocket Pool was represented by its own contract called a minipool, with the operator providing part of the 32 ETH and the rest supplied from stakers’ deposits. Since Saturn 1 went live on 18 February 2026, new validators are created through a megapool instead: a single contract per node operator that acts as the withdrawal address for all of that operator’s validators. Existing minipools keep working and can be migrated. The bond per validator has been cut over time, most recently from 8 ETH to 4 ETH, which makes participation more accessible. Because the ETH from stakers is borrowed by node operators, operators have a strong reason to avoid mistakes, since penalties reduce their own bond first.
What rETH Is
rETH is the token stakers receive. Unlike some competing tokens, its balance does not grow in your wallet. Instead, the exchange rate between rETH and ETH rises over time as rewards accumulate, so each rETH becomes redeemable for more ETH. That makes it simple to hold and easy for other applications to handle, although it also means you have to compare the token’s value with ETH to see your gain. It is a claim on staked ETH, so it carries the risks of wrapped assets and the risks of wrapped assets generally.
The RPL Token
RPL is Rocket Pool’s protocol token. Under the old minipool rules, node operators had to stake RPL as collateral. Since Saturn 1, staking RPL is optional: operators who stake it earn a share of the protocol’s ETH revenue, currently 9%, alongside RPL inflation rewards, and staked RPL also gives a say in governance. That still links part of operators’ income to the value of RPL, which is a more volatile and less liquid asset than ETH. The background is how governance tokens and decentralised autonomous organisations work.
How Rewards Flow
Staking rewards come from the Ethereum network itself, not from the protocol. The rewards earned by each validator are split between the node operator, who takes the rewards on their own bond plus a commission, the stakers whose ETH was used, and RPL stakers who receive a share of protocol revenue. The rate of return is not fixed and varies with the amount staked across the network and network activity. Learning APY versus APR and real yield in DeFi shows how advertised rates are calculated and what they leave out.
Rocket Pool Versus the Largest Protocol
The biggest liquid staking protocol is much larger than Rocket Pool, and it works differently. It uses a curated group of professional operators and issues a token whose balance rebases upward, and it has a very large share of all staked ETH. Rocket Pool is smaller, more open and more decentralised in how operators join, but it has less liquidity and a smaller footprint across DeFi. For a staker, that can translate into a slightly different risk profile: greater decentralisation and a token that may be less widely accepted as collateral, versus a larger, more liquid alternative with more concentration risk. Neither is risk-free, and some people spread their stake across more than one.
Withdrawals and Liquidity
Ethereum’s staking withdrawals were enabled in 2023, which made it possible to redeem staked ETH. Rocket Pool holders can redeem rETH through the protocol when it has enough ETH available, and they can also sell it on secondary markets. If a market is thin, the price can diverge from the underlying value, and in stressed conditions the difference can widen, so it is important to understand market liquidity before relying on a quick exit.
Running a Node
Being a node operator is a serious commitment. You need reliable hardware and internet, comfort with command-line tools, careful key management and the time to keep software updated. Downtime and mistakes can cost you rewards or trigger penalties, and serious misbehaviour can lead to slashing. You should understand how nodes work, secure your keys properly through self-custody awareness, and be ready for the tax record keeping involved. If that sounds like too much, staking as a passive depositor is far simpler.
The Risks
Smart contract risk: the protocol relies on complex contracts, and audits cannot rule out bugs. Understanding smart contract exploits and how a smart contract audit works helps here.
Operator risk: an operator could make mistakes, go offline or be penalised. Protocol design tries to protect stakers, but losses are possible.
Depeg and liquidity risk: rETH may trade below the value of the ETH it represents, particularly during stress, and smaller markets can make exits harder.
Governance risk: changes to parameters and upgrades are decided by governance, which can shift the terms.
Layered risk: using rETH as collateral or in other strategies adds risk from those systems, including liquidation, which is how liquidation works in leveraged positions.
Scams and fake sites: imitation staking sites and fake yield platforms are common. Beware of fake staking rewards platforms and check every address.
Decentralisation as a Goal
Advocates of Rocket Pool argue that Ethereum is safer when staking is spread across many independent operators rather than a few large ones. If a single protocol or a small group of firms controls a large share of staked ETH, there are worries about censorship, coordinated failures or governance capture. Whether those risks are large in practice is debated. Reading decentralisation explained and public versus private blockchains helps frame the discussion. As a user, it is worth deciding how much weight you give decentralisation compared with yield, liquidity and simplicity.
Where rETH Is Used in DeFi
Like other liquid staking tokens, rETH can be used in lending markets and liquidity pools, which can add yield but also stack risk. The mechanics are those of lending and borrowing in crypto, a liquidity pool and yield farming. Check the size of these markets with total value locked and DefiLlama, and research any protocol you plan to use, since knowing how to research DeFi protocols is essential.
Protecting Your Wallet
Any use of a staking protocol involves connecting a wallet and signing transactions. Confirm you are on the genuine site, be careful about approvals and use a hardware wallet where you can. Manage token approvals, learn how to revoke smart contract approvals and consider using a hardware wallet with DeFi.
A Worked Example With Made-Up Numbers
Imagine you deposit 10 ETH and receive rETH when one rETH is worth 1.10 ETH. You would receive about 9.09 rETH. If, a year later and after staking rewards have accumulated, one rETH is redeemable for 1.13 ETH, your 9.09 rETH would be worth about 10.27 ETH, a gain of roughly 2.7 percent in ETH terms. The number of tokens in your wallet never changed, only the exchange rate did. If the dollar price of ETH fell in that year, your position would still have lost value in dollar terms, and if the market price of rETH traded at a discount to its redeemable value, selling immediately would have returned less. All of the figures here are invented for illustration and do not describe actual rates.
Comparing Costs and Complexity
A passive staker pays for convenience through the fees and commissions built into the protocol, which reduce their share of rewards compared with solo staking. A node operator earns more per ETH they contribute, thanks to commission on the ETH provided by others, but pays in hardware costs, time and risk, and may choose to hold RPL for an extra revenue share. Both should weigh those costs against the yield, which is modest and variable. Gas fees matter for smaller amounts, since a few transactions can take a noticeable bite out of a small deposit.
Tax Considerations for Australians
Staking and liquid staking raise open questions. Rewards may be treated as income when received, as the ATO’s guidance on staking rewards explains, swapping ETH for a liquid staking token may be a disposal, and running a node can involve business-like activity in some cases. The tax side covers liquid staking tokens, running a validator, crypto staking tax and the staking reward cost base and disposal rules. Keep thorough records, since crypto tax record keeping depends on them, and speak to a registered tax professional.
Choosing Between Approaches
There is no single best way to stake. Solo staking offers maximum control and decentralisation for people with the resources and skills. Exchange staking is simplest but adds custodial risk. A large liquid staking protocol offers liquidity and wide acceptance, while a more decentralised one such as Rocket Pool offers a different balance. Weigh your priorities: how much you value simplicity, liquidity, yield, decentralisation and control, how long you plan to hold, and how comfortable you are with smart contract risk. If you do not yet hold ETH, start with buying Ethereum in Australia and understand what Ethereum is.
A Simple Checklist
Decide your role: passive staker or node operator, and be honest about the work each involves.
Understand the token: know how rETH accrues value and where you can redeem or sell it.
Check the current terms: requirements, fees and commissions change with upgrades.
Limit your exposure: only stake what you can afford to have locked in smart contracts.
Keep records: every deposit, reward and redemption for tax purposes.
Key Takeaways
Rocket Pool is a liquid staking protocol for Ethereum that lets anyone run a node with a fraction of the usual deposit, while other users deposit ETH and receive rETH, a token whose value rises against ETH as staking rewards accumulate. Since the Saturn 1 upgrade in February 2026, new validators sit in a single megapool per operator with a 4 ETH bond, and staking RPL is optional. The design aims to spread staking across many independent participants rather than a few large operators.
The trade-offs include smaller liquidity, less widespread acceptance in DeFi, smart contract and operator risk, and dependence on governance decisions. The choice comes down to how decentralisation is weighed against convenience and liquidity. Understand the risks, avoid stacking leverage, protect your wallet and keep careful records for tax.