Aave (AAVE) Explained
Aave is the leading decentralised lending and borrowing protocol in the DeFi ecosystem. It allows users to deposit cryptocurrency as collateral and earn interest, borrow against that collateral at defined interest rates, and access flash loans (uncollateralised loans that must be repaid within one transaction). Since its launch in January 2020 (as a rebrand of ETHLend), Aave has consistently ranked among the top three protocols by total value locked across all of DeFi and has pioneered several financial primitives that have become standards across the industry.
The core insight of Aave is that enormous amounts of cryptocurrency are held idle — owners are not using their BTC, ETH, or stablecoins for anything productive; they are simply holding them in wallets. Aave creates a marketplace where these idle assets can be lent to borrowers who need liquidity, with suppliers earning interest and borrowers paying it. Unlike traditional bank lending, there are no credit checks, no KYC requirements, no minimum deposit amounts, and no account applications — just smart contracts on Ethereum executing financial logic transparently.
For Australian investors, AAVE is the governance token of the Aave Protocol and is available on all major Australian exchanges. The protocol itself is accessible to any Australian with an Ethereum wallet and the technical knowledge to interact with DeFi. Understanding Aave means understanding how lending and borrowing in crypto works, the risks involved, and what AAVE’s governance role means for the token’s value.
How Aave Lending and Borrowing Works
Aave operates through liquidity pools — separate pools for each supported asset (ETH, USDC, WBTC, DAI, and dozens of others). Lenders (liquidity suppliers) deposit assets into the relevant pool and receive aTokens in return (aUSDC for depositing USDC, aETH for depositing ETH, etc.). These aTokens continuously accrue interest, directly increasing in balance over time. When a lender withdraws, they burn their aTokens and receive their original deposit plus accumulated interest.
Borrowers must deposit collateral that exceeds the value of their loan — this is called “overcollateralisation.” Each asset has a loan-to-value (LTV) ratio: for example, ETH might allow borrowing up to 80% of its value. If a borrower deposits $10,000 of ETH, they can borrow up to $8,000 of USDC. The excess collateral protects lenders: if the borrower’s collateral value drops below the liquidation threshold, anyone can liquidate the position (repay some of the loan in exchange for receiving discounted collateral), protecting the liquidity pool from losses.
Interest rates in Aave are algorithmic, adjusting dynamically based on pool utilisation: when most of a pool’s assets are borrowed (high utilisation), rates rise to incentivise more lending and discourage more borrowing; when utilisation is low, rates fall to attract borrowers. This automated interest rate model eliminates the need for human rate-setters and ensures rates reflect real-time supply and demand dynamics. Compare this to traditional lending and borrowing in DeFi for broader context.
Variable and stable interest rate options are available on Aave. Variable rates fluctuate with utilisation; stable rates provide more predictable borrowing costs (though they can be rebalanced in extreme cases). For lenders, interest rate exposure is always to the variable rate.
Flash Loans: Aave’s Most Innovative Feature
Flash loans are Aave’s most technically innovative contribution to DeFi — and one of the most misunderstood. A flash loan is an uncollateralised loan that is issued and must be repaid within the same Ethereum transaction. If the loan is not repaid by the end of the transaction, the entire transaction reverts as if it never happened. The atomicity of Ethereum transactions makes this possible: either the whole transaction succeeds (loan issued, action executed, loan repaid) or the whole transaction fails.
Flash loans have several important legitimate use cases. Arbitrage: a trader can borrow a large amount of Token A, sell it on one decentralised exchange where the price is high, buy it back on another where the price is low, and repay the loan with a profit — all in one transaction, with zero capital required. Collateral swaps: a borrower who has collateralised their position with ETH can flash loan, repay their current loan, withdraw their collateral, re-deposit different collateral, take a new loan, and repay the flash loan — all atomically. Self-liquidation: borrowers can flash loan to gracefully close their positions before being externally liquidated at a discount.
Flash loans have also been used in several high-profile exploits of vulnerable DeFi protocols — borrowing massive amounts to manipulate price oracles within a single transaction, exploiting poorly designed pricing mechanisms. This has led to improved oracle security across DeFi (including better adoption of Chainlink price feeds) and more robust protocol design. Flash loans are not inherently malicious — they are neutral financial infrastructure that can be used constructively or exploitatively depending on the target contract’s security design.
Aave v3: Efficiency Mode, Portals, and Multi-Chain
Aave v3 (launched March 2022) introduced several significant improvements. Efficiency Mode (eMode) allows users to maximise capital efficiency when borrowing and collateralising correlated assets — for example, borrowing USDC against USDT collateral. Because both are pegged to $1 USD, the liquidation risk is minimal, so eMode allows much higher LTV ratios (up to 97%) for correlated asset pairs, enabling more capital-efficient strategies.
Portals enable cross-chain liquidity in Aave: approved bridge protocols can burn aTokens on one chain and mint equivalent aTokens on another, allowing liquidity to flow between Aave deployments on different blockchains without complex bridge mechanisms. Aave v3 is deployed on Ethereum mainnet, Polygon, Arbitrum, Optimism, Avalanche, Base, and several other chains — making it genuinely multi-chain DeFi infrastructure rather than Ethereum-exclusive.
Isolation Mode prevents newly listed or higher-risk assets from affecting the broader liquidity pool: isolated assets can only be used as collateral to borrow stablecoins, with a debt ceiling. This allows Aave to list more assets with reduced systemic risk, expanding the range of tokens accessible through Aave’s lending infrastructure.
GHO: Aave’s Native Stablecoin
In 2023, Aave launched GHO — a decentralised stablecoin minted by the Aave protocol. Like MakerDAO’s DAI (which is minted against ETH and other collateral in Maker vaults), GHO is minted by borrowers who lock up Aave-listed assets as collateral. The difference is that GHO’s interest rates are governed by AAVE token holders, and interest paid on GHO loans goes to the Aave DAO treasury rather than to liquidity providers. This gives the Aave protocol a direct revenue stream from stablecoin issuance and provides GHO users with a borrow rate influenced by community governance.
AAVE Token: Governance and Safety Module
AAVE is the governance token of the Aave Protocol, giving holders voting rights on protocol parameters, new asset listings, risk adjustments, and treasury allocations. AAVE holders can also stake tokens in the Safety Module — a reserve pool that serves as a backstop in case of a “shortfall event” (if Aave protocol losses exceed the reserves). In return for taking on this slashing risk (up to 30% of staked AAVE can be slashed in a shortfall event), Safety Module stakers earn ongoing AAVE rewards.
The Safety Module creates direct alignment between AAVE token value and protocol security: the more AAVE staked in the Safety Module, the more protected the protocol is. Stakers are compensated for this risk with AAVE emissions. Understanding tokenomics for AAVE means recognising that Safety Module staking is a risk-return tradeoff — higher yields but with real slashing exposure in extreme protocol failures.
AAVE has a total supply of approximately 16 million tokens (a relatively modest supply by crypto standards), with emissions used for Safety Module rewards and liquidity incentive programs. The limited supply combined with the governance rights and Safety Module utility creates a reasonably strong demand model — though as with all governance tokens, the practical voting participation often concentrates in large holders (whales and funds) rather than retail token holders.
Risks of Using and Investing in Aave
Aave involves several specific risks that users and investors should understand explicitly. Smart contract risk is always present: Aave has been audited extensively and has operated securely for years, but DeFi smart contract vulnerabilities can never be fully eliminated. Liquidation risk affects borrowers: if collateral value drops rapidly, positions can be liquidated with a discount penalty before the borrower can respond. Oracle risk means that if the price feeds Aave uses (from Chainlink and others) are manipulated or fail, incorrect liquidations or attacks become possible.
Liquidity risk means that in extreme market conditions, pool utilisation can reach 100% and lenders may temporarily be unable to withdraw their assets until new deposits or loan repayments reduce utilisation. Governance risk means that a hostile governance capture (acquiring sufficient AAVE to pass malicious proposals) is theoretically possible, though the Safety Module’s slashing risk incentivises community resistance to such attacks. Review our full guide on DeFi investing risks before depositing significant assets.
Accessing Aave from Australia
Aave is accessible to any Australian with an Ethereum-compatible wallet (MetaMask, Ledger, WalletConnect-compatible wallets). Navigate to app.aave.com, connect your wallet, and you can supply assets and borrow against them. There is no KYC requirement and no account creation. Gas fees on Ethereum mainnet can be significant ($5-50 AUD depending on network congestion) but are minimal on L2 deployments like Polygon or Arbitrum where Aave v3 is deployed.
For AAVE token investment, it is available on CoinSpot, Swyftx, Independent Reserve, Binance Australia, and CoinJar. Compare fees across the best Australian crypto exchanges for purchase.
Tax Treatment of Aave Activities in Australia
Multiple tax events arise from Aave usage. Depositing to Aave in exchange for aTokens may or may not be a disposal depending on the ATO’s assessment of whether the token swap represents a change in beneficial ownership. Interest earned through aTokens (which accrue in real-time) is likely assessable as ordinary income as it accrues. Borrowing does not create a tax event. Liquidation of a position creates a capital gain or loss event. AAVE staking rewards from the Safety Module are ordinary income at receipt. All disposals of AAVE tokens are capital gains tax events. These DeFi tax complexities benefit from professional advice — review the ATO’s rules on crypto and seek guidance from a crypto tax specialist for significant Aave usage. All transactions must be reported to the ATO.
Key Takeaways
Aave is the leading decentralised lending and borrowing protocol in DeFi, with liquidity pools for dozens of assets across multiple chains. Lenders earn interest through aTokens; borrowers pay interest on overcollateralised loans with algorithmic rates. Flash loans enable zero-capital, single-transaction loans for arbitrage, collateral swaps, and self-liquidation. Aave v3 adds Efficiency Mode, Portals, and Isolation Mode for capital efficiency, cross-chain liquidity, and risk management. GHO is Aave’s native stablecoin with DAO-controlled interest rates. AAVE is the governance token with Safety Module staking providing yield in exchange for protocol backstop risk. For Australian investors, Aave usage creates multiple complex tax events requiring careful reporting. Approach Aave as both a DeFi usage tool and a governance token investment, with clear understanding of smart contract, liquidation, and Safety Module slashing risks.
Frequently Asked Questions
What is Aave (AAVE)?
Aave is a cryptocurrency built on the Ethereum network, designed for decentralised lending and borrowing. It is one of the established projects in the broader blockchain ecosystem with active development and community adoption.
How does Aave work?
Aave uses Ethereum Proof of Stake to validate transactions and secure its network, enabling decentralised operations without relying on a central authority. Participants can interact with the protocol to decentralised lending and borrowing directly on-chain.
What is AAVE used for?
The AAVE token is used to pay network transaction fees, participate in governance votes and access protocol features such as staking or liquidity provision. Its utility is tied directly to activity on the Aave network.
How is Aave different from Bitcoin?
While Bitcoin is designed as a peer-to-peer store of value and payment network, Aave is built for decentralised lending and borrowing, giving it a different purpose, architecture and target use case within the crypto ecosystem.
Can Australians buy Aave?
Yes, Australians can purchase AAVE on major exchanges including Swyftx, CoinSpot or Binance Australia. You will need to create an account, complete identity verification and deposit AUD before placing your first order.
Is Aave a good investment for Australians?
Aave is a high-risk asset like all cryptocurrencies, with price driven by adoption, developer activity and broader market sentiment. Australians should conduct thorough research and only invest what they can afford to lose.
What are the main risks of investing in Aave?
Key risks include high price volatility, regulatory uncertainty in Australia, competition from similar blockchain projects and the possibility of declining developer interest or adoption over time. Smart contract vulnerabilities may also apply depending on the protocol design.
What is the supply structure of AAVE?
Aave has a maximum supply of approximately 16 million AAVE tokens. Token supply dynamics including emission rates, burning mechanisms and distribution schedules are important factors to understand when evaluating AAVE as a long-term holding.
WRITTEN & REVIEWED BY Chris Shepley
UPDATED: JULY 2026












